The Port used by Sips is UDP 5060 for signaling and media are sent through RTP.  The location of setting can be viewed at Admin>Setting>Ports. In this portion you can find the details of Sip Protocol. Sip works on TCP, UDP or TLS. UDP and TCP are considered unsecure, since sip packets are sent unencrypted. TLS is most secured sip communication, since it encrypts just as HTTP. But default ports used are RCF3261 is 5060 for sip and for Sips it is 5061.

The most commonly used port is 5060 which is more associated with sip. What Is SIP? The protocol of communication supports the signaling protocol, which are basically used for supporting of session involved in multimedia communication like voice calls or video (opt for Free VoIP Calls). These are possible only through high speed broadband connection.

The port 5060 is more feasible execution of transport of multimedia streaming, online gaming, video conferencing, instant message. Various media streams are catered through this port, like the protocol working on this port will utilize creation, modification and termination of session for unicast or multicast.

Port 5060 server is like a gateway in deleting, adding or inviting the participants for streaming of media. There is an involvement in changing of address or port. The main person behind the implementation of original design of Sip is Henning Schulzrinne from Columbia in year 1996.

Using of Sip ports over UDP, TCP or TLS are as follows:-

  1. Sip UDP port: If you are utilizing SIP over UDP the following fields has be set first, default port UDP 5060 and multi port are also permitted like 5060, 5064.
  2. SIP TCP Port: If you’re utilizing Sip over TCP the following default has to be set TCP is 5060.
  3. SIP TLS Port: If you’re utilizing Sip over TLS the following default has to be set TLS is 5061.
SIP Port